Is anyone using the redcat 51 with a 585mc sensor using a zwo Eaf with the pro Astro gear Eaf holder , if so so what step size are you using for autofocus?.
Dave
|
You cannot like this item. Reason: "ANONYMOUS".
You cannot remove your like from this item.
Editing a post is only allowed within 24 hours after creating it.
You cannot Like this post because the topic is closed.
I have an RC51 with a 183 MC camera. I left the EAF at default values for ASIAIR+. All works fine. Important to have RC51 at preliminary focus before installing the EAF. Hope this helps.
|
You cannot like this item. Reason: "ANONYMOUS".
You cannot remove your like from this item.
Editing a post is only allowed within 24 hours after creating it.
You cannot Like this post because the topic is closed.
Likewise! Set to default.
|
You cannot like this item. Reason: "ANONYMOUS".
You cannot remove your like from this item.
Editing a post is only allowed within 24 hours after creating it.
You cannot Like this post because the topic is closed.
I’m using a step size of 50 and get a nice curve fit from it. This is via NINA. I’m also overshooting by 250 steps and have no issues with backlash. That should be a good starting point at least.
|
You cannot like this item. Reason: "ANONYMOUS".
You cannot remove your like from this item.
Editing a post is only allowed within 24 hours after creating it.
You cannot Like this post because the topic is closed.
Tom Dinneen: I’m using a step size of 50 and get a nice curve fit from it. This is via NINA. I’m also overshooting by 250 steps and have no issues with backlash. That should be a good starting point at least. Thanks , what camera are you using on your redcat .
|
You cannot like this item. Reason: "ANONYMOUS".
You cannot remove your like from this item.
Editing a post is only allowed within 24 hours after creating it.
You cannot Like this post because the topic is closed.
Dave B:
Tom Dinneen: I’m using a step size of 50 and get a nice curve fit from it. This is via NINA. I’m also overshooting by 250 steps and have no issues with backlash. That should be a good starting point at least. Thanks , what camera are you using on your redcat . ASI294MM in bin 1 so 2.3 microns.
|
You cannot like this item. Reason: "ANONYMOUS".
You cannot remove your like from this item.
Editing a post is only allowed within 24 hours after creating it.
You cannot Like this post because the topic is closed.
to create to post a reply.